Name Lock Release / Electric Strike Brief Description 8 - 12 Volt AC/DC Lock Release for Door Entry Intercom and access control systems - it can however be used as a stand alone lock release by using a suitable power supply and switch and should be fitted to the keep side of a traditional Yale type door lock (known as a night latch). Metal Construction. Fail Locked. Price £10.99 Quantity:

Name Internal Magnetic Lock / Mag Lock - 600 Lb Holding Force Brief Description Magnetic Lock (Mag Lock) for Door Entry Intercom and Access Control Systems - it can however be used as a stand alone lock release by using a suitable power supply and switch. Dual Voltage 12 Volt DC with a current consumption of 480ma or 24 Volt DC with a current consumption of 240ma. Suitable for use on wooden, metal, glass and fire proof doors. Approx. Dimentions: 250mm(L) x 25mm(H) x 42mm(W) Price £39.99 Quantity:

Name Weatherproof Magnetic Lock / Mag Lock - 800Lb Holding Force Brief Description Magnetic Lock (Mag Lock) for Door Entry Intercom and Access Control Systems - it can however be used as a stand alone lock release by using a suitable power supply and switch. Suitable for use on Wood and Metal Gates. Price £117.50 Quantity:

Name Solenoid Bolt Electric Drop Lock - 1500 KG Holding Force Brief Description Electric Solenoid Bolt is a fail-safe locking device for access control systems that require maximum holding force. The lock is designed to be mortice fitted into any suitable door and frame and can be mounted in a Horizontal or Vertical position making it very flexible. It is also suitable for double doors as two can be fitted side by side to lock both doors if required. Price £89.99 Quantity:

Name Z and L Mounting Kit for Maglocks Brief Description Z & L Mounting Kit for Inward opening doors and gates .For use with our range of Magnetic Locks. Price £24.99 Quantity:

Name Access Control Power Supply with Timers Brief Description Wall mountable 12 Volt, 1 Amp power supply unit specifically designed for access control as the unit has built in lock out put with adjustable timers and a request to exit button input. Price £34.99 Quantity:

Name Bell Transformer 12 Volt AC Brief Description 240 Volt AC to 12 Volt AC Bell Transformer, Ideal replacement for most AC Door Entry systems or just a lock release. Price £9.99 Quantity:

Name Mortice Face Plate for Lock Release / Strike Brief Description This Mortice plate replaces the existing mounting plate on a lock release allowing you to MORTICE the lock release into the door frame. Price £3.65 Quantity:

Name Timed Relay Board, Triggered by Voltage or Clean Contact Brief Description The timer can operate over a wide range of supply voltages (9-28V DC, 7 - 20 V AC).  LED indication is used to show the state of the relay contacts. Voltage supply connection is not polarity conscious, Output voltage free change over contacts, Can be set to operate for a preset time as soon as the trigger is applied. (Instant) or can be set to operate only after the trigger has been applied for a preset time. (Delayed). Two timing ranges are available 0.25s to 15s and 2s to 3.5mins selectable via link.  Adjustment within each range is via a potentiometer. Can be triggered by a clean contact input e.g. door contacts or push buttons or can be triggered by a voltage input (9 to 28V DC or 7 to 20V AC) e.g. lock output from door entry system to give timed lock operation Price £24.99 Quantity:

Name Relay Module Converts AC/DC Input to Volt Free Output Brief Description Very Handy Relay Module converts an AC or DC input to a voltage free output. An example of use would be to operate a magnetic lock or automatic door control on an Access Control system that only gives an AC output for a lock release. Operating Voltage 6 - 35 VDC or 4 - 24VAC, Voltage Free Output, Contact Rating 120VAC / 60VDC at 2A, Voltage input not polarity conscious. Price £19.99 Quantity:

Name Green Emergency Door Lock Release / Manual Call Point Brief Description Emergency door release / call point is used in access control systems to release the locking mechanism (usually a Magnetic Lock) in the event of an emergency by disrupting the supply to the lock. The call point can be flush mounted by using any standard UK back box or can be surface mounted by using the surface mounting patrice supplied. Dimentions 86mm x 86mm x 50mm (with Back Box) Price £14.99 Quantity:

Name Plastic Request To Exit Button Brief Description Plastic surface mounted request to exit button complete with back box. Price £15.99 Quantity:

Name Metal Request to Exit Button Brief Description Flush mounting, metal request to exit button. Stainless Steel. Supplied with metal flush mounting back box. Price £24.50 Quantity:

Name Surface Mounting Spacer for Metal REX Brief Description Surface mounting adaptor / spacer for metal flush mounting request to exit buttons. Aluminium. Price £7.99 Quantity: